SURFACE TREATMENTS

There is a wide variety of surface treatments for metal products, so that they can resist corrosion, allowing the final product to have a lower deterioration factor as a result of an electrochemical reaction by the environment where it will be used.

Some of our products are treated by a sequence of several of these processes. Here we present some of the most used ones.

Electro polishing

Electrolytic polishing is used to produce a surface with improved appearance and reflectivity, to remove excess metal to precisely fit the required dimensions, and to prepare the surface for inspection of imperfections.

The process involves the preferential anodic dissolution of high spots on the surface after steam degreasing and hot alkaline cleaning. Acids are often used as electrolyte solutions; consequently, adequate rinsing is required afterwards.

One of the advantages of this treatment, unlike a mechanical polishing is that an electropolished surface shows the absence of holes with defined edges, being therefore with this type of finish, less possibility of housing foreign materials.

Galvanoplasty

Electroplating is a chemical or electrochemical process to apply a metallic layer to the product, for example, nickel to protect against corrosion, hard chrome to improve surface properties or silver and gold to beautify it. Occasionally, non-metallic materials are used. The product, connected as the cathode, and an anode of the metal to be deposited are immersed in an electrolyte solution (which may be acidic, alkaline or alkaline with salts and cyanide complexes) and connected externally to a direct current source. The positively charged cations from the metal anode migrate to the cathode, where they are reduced to the metal and deposited as a thin layer. The process continues until the new coating reaches the desired thickness, and the product is washed, dried and polished.

Anode: Cu → Cu + 2 + 2e-; Cathode: Cu + 2 + 2e- → Cu

Among the advantages of this process we can mention the objective to protect against corrosion or for aesthetic/decorative purposes, thus, in case of damage, it will always be easier to change the coating material than the coated one.

In electroforming, a process closely related to electroplating, molded objects, such as plaster or plastic, are made conductive by applying graphite and then connected as the cathode so that the metal is deposited on them.

The electroforming process offers comparative advantages over other processes such as

 Reliable reproduction of details and textures.

 Modification of the mechanical properties of the electroformed products, by adjusting the parameters of the electroforming bath.

Elaboration of parts with complex internal geometries, very difficult to obtain by other technologies.

It is usually cheaper than other methods and the processing times are usually shorter

 

In anodizing, a process that has become increasingly important in recent years, aluminum products (titanium and other metals are also used) are connected as the anode and immersed in dilute sulfuric acid. However, instead of aluminum positive ions forming and migrating to settle on the cathode, they are oxidized by the oxygen atoms that arise at the anode and bind to it as an oxide layer, which gives it its main advantage: it gives the material greater strength.

The main characteristics obtained by the materials after anodization are

  • Increased abrasion resistance
  • Protection against corrosion
  • Easy to paint your surface
  • Uniformity of surface
  • Prolonging the life of the material

In MetalCast we offer these and other processes to achieve the requirements of the metal parts that our customer needs.

Contact our team to identify the necessary elements so that your project of production of metallic pieces to the measure has the characteristics that this looking for your company.

FOLLOW US ON OUR SOCIAL NETWORKS

Leave a comment

Your email address will not be published. Required fields are marked *

en_USEN